Turning devices for all types of loads
We design and manufacture Ox turning devices allow 90º turns for horizontal or vertical placement of all types of loads: compost, drums, pallets, bodies, containers, coils, boxes, manure, masonry material, containers
The common Load Tilters are support platforms where a piece is seated on two sides and allows it to be tilted in a tilt range of around 90 degrees for pieces such as coils or palletized steel round materials or other prismatic pieces such as dies, molds, etc.
There are also special versions to tilt up to 180 degrees, to tilt plates or dies and put them upside down or vice versa.
MATERIALS AND FINISH
The materials used for the chassis are steel of mechanical construction and the finish is sandblasted Sa 2.5 according to ISO 8503-2: 2012 standards. Painted minimum quality C2, epoxy polyurethane primer layer and 2 layers of RAL 1028 color. For other qualities please ask us.
We comply with the provisions of the directives of the European Parliament and of the Council 2006/42 / EC, of May 17, 2006, regarding the approximation of the legislations of the member states on machines and Directive 2014/30 / EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States on electromagnetic compatibility, and has been manufactured in accordance with the following harmonized standards:
– UNE-EN ISO 12100: 2012. Machine safety. General principles for design. Risk assessment and risk reduction.
– UNE-EN ISO 3834-2: 2006. Quality requirements for fusion welding
The tilters can be driven by electric motor-reducer or by electro-hydraulic drives, commonly cylinders for 90 degrees rotation or hydraulic motor for 180 degrees rotation. In all cases they have security lock of the turn.
You can make tilters for all types of parts and capacities, being able to incorporate mooring systems of the piece, mobile motorized elements to adjust to different measurements, etc.
Protections for contact surfaces can be incorporated in different materials such as Polyamide 6 or Polyurethane.
Multiple solutions can be integrated in order to enable the maneuver in an agile and safe way, from low platforms or flush with the ground through civil works, with access gateways for operators, etc.
The perimeter of the machine can be limited by conventional fencing, by laser perimeter barrier or by combination of both systems. It can also be integrated by the customer giving the safety signal to the safety module that all our tumbling equipment are integrated in the electrical panel or in the desk.
10 Tons Turning Devices
25 Tons Turning Devices
8 Tons Turning Devices