SWIVEL LIFTING BEAM + J HOOK OX WORLDWIDE
1
One of our Russian clients is dedicated to the manufacture of wind towers, so you need a Swivel lifting Beam with a J hook to hold the sections of the towers.
The response of our engineering department was to create a simple and smart solution. They designed a Swivel lifting Beam of 8 meters and 100t of lifting capacity by means of two 60t cranes and together with another hook J suspended from another crane, it is possible to lift tower sections of up to 200t.
- The Swivel Lifting Beam J Hook has an integrated free rotation system of the J hook located at the bottom. The J hooks are a common application to move large ferrules or sections of wind turbine tower or similar by means of a unit at each end. In this case the contact area is protected by bolted polyurethane plates that allows it to be easily replaced.
This supply complements a previous supply of several J hooks for tower sections and C-type hooks for the ferrules that will form the wind tower section. (wind turbine tower).
MAIN TYPES OF BEAM LIFTING
1
WE MANUFACTURE ALL OF THEM
AND WE HAVE SOME OF THEM IN STOCK,
ASK US!
DOWNLOAD The Swivel Lifting Beam J Hook CATALOG V.2.
Fill the following form and will have access to the download area.
If you have any problems, contact alejandro@oxworldwide.com
Contact Us