MULTI LUG BEAM THE BEST SELLING MODEL
IT’S A NEW SOLUTION OF GREAT FLEXIBILITY!
Multi Lug Beam can be
manufactured in any length or
capacity you need!
Multiple lifting beam options on top and bottom.
Available in STOCK: 10t, 15t, 24t, 34t, 50t and 4 mts in length.
Available ON DEMAND: up to 200 tons and up to 8 mts length.
WITH NEW ACCESSORY SUPPORT LEGS!
NEW SYSTEM FOR MANIPULATE IN FORKLIFT!
FROM 10 TO 50 TONS, AND 4 METERS IN LENGTH.
ADVANTAGES OF MULTI-LUG BEAMS
In the upper part container lifitng beam: It can be used by means of a central hitch by one point for situations with reduced heights or by means of a two-leg grab if there is height and thus have greater stability. It can even be used to add two cranes to enable the hoisting of loads that exceed the unit capacity of individual cranes.
In the lower part container lifitng beam: It has a continuous hole pattern that allows the position of the center of the load to be adjusted with reasonable precision. Additionally, as it is a design oriented to the lifting of maritime containers, it has transverse and slightly higher lugs located at the width of the container, to allow the hooking and lifting of these through the use of four chains-cables with a hook specific for the part of the lower side (twistlock container) to raise the container by the base.
- Versatility, both for lifting ISO-type shipping containers and for industry in general due to the additional solution for lifting any other longitudinal load intended for transport on a conventional truck bed and that can be lifted with oblique pulls or with two units.
- Container lifting beam allows the center of the load to be adjusted both longitudinally and transversally by means of the accessories supplied together according to each need.
- It incorporates a vacuum handling system using a forklift.
- It has optionally accessory support legs.
- Units available in stock except for sale with immediate delivery.