DELIVERY OF OX-TBC-100 SELF-PROPELLED TROLLEY
Now, Ox Worldwide has delivered 1 OX-TBC-100 self-propelled trolley set, including OX-CT-100 rear cars, with a load and moving capacity of 100t. This is a request of a national client specialized in the Transportation and Moving of Machinery.
This trolley is supplied at 400v 50Hz and is controlled at a distance by a radio frequency remote control. The trolley works with oil and hydraulic movement and lifting.
Is the perfect solution for heavy machinery handling under roof. To place the trolley and the rear carts under the machinery that will be handled, it must be previously lifted with hydraulic jacks.
In this case, it has free rotating beam with wheels, upon client request.
DELIVERY OF 2,5t C HOOK
The function of this C hook
is the lifting and handling of tubes
in horizontal position, holding them by the inner hole. Its maximum capacity is 2500 kg, arm length of 3000 mm and a mouth height of 500 mm. The device is handled with the bridge crane
and is balanced in vacuum, locating the ring in the first position in the top beam. Once the load is placed, the device is supported on the load, with the aim to move the ring either to the first or the second working position. Then, we can lift in a balanced way the 2 materials that the client need to handle.
DELIVERY OF 30T C HOOK
Ox Worldwide has delivered 2 units (will be 8 in total) of 30t C hooks for an international client.
The application of these C hooks is the lifting of steel coils up to 30t in horizontal position.
Manufactured with high resistance alloy steel, it has also high density polyethylene (HDPE) in the 3 inner sides, to protect the load. It has a top ring with a 2 sling chain of 26 mm G100.
50T SPREADER BEAMS
Delivery for a national client of several sections of 1.000 and 2.000 mm with endings and descendings, to set up a 50t capacity Spreader Beam.
OX AT METALES Y METALURGIA MAGAZINE
Cargo Flet Blasant – Ox Worldwide has appeared at Metales y Metalurgia magazine, in a Special number featuring Machinery and Equipment for the Reuse and Recycling of Metals.
DELIVERY OF SPECIAL BEAM OF 6T WITH 7 C HOOKS AND AUTOMATIC BALANCING
Design and manufacturing of special beam with 7 serial C hooks
, to handle up to 4 billets cross of 140 x 140 mm and 10 mts of length, with a weight of up to 6.000 kg. Moreover, it is prepared for thermic radiation, up to 1100ºC during 2 minutes. It has an automatic balancing system
, played by a small hydraulic central and managed by an onboard PLC. It balances the suspended load to ease the rescuing manioeuvre
of pieces in the roller line.
DELIVERY OF 2 LIFTING CLAMPS
Special design of 2 clamps, model OX TPH-HD 16,5t, design to lift cylindric tubes of big length, through a 2 sling chain, with a vertical axis up to 45ºC. With mouth opening of 60 mm and 16,5t of capacity both clamps.
DELIVERY OF ELECTROMAGNET FOR LIFTING 20 KG ROLLERS
Lifting device that works through rounded electromagnets
placed in the bottom’s device, for the extraction and lifting of liner rollers, from its axis, diameter 75 mm.
It has an emergency power supply
operated through a battery, that allows to maintain the piece in suspension, if power supply fails. It is delivered with specific supporting handle.
DELIVERY OF ADJUSTABLE BEAM OF 8T
Manufacturing of H type beam, adjustable in 2 axis and with capacities up to 8t.
The beam is adjustable in length and width thanks to 4 rotating and adjustable hooks. In length can be adjusted from 2500 to 1000 mm and in width from 500 to 1500 mm. To adjust the main beam, the beam must be placed in the ground and hold it with the crane, then it’s moved easily. The operation must be repeated in the other side so it is balanced.
If requested, the beams can be disassembled and be used single.
2T ADJUSTABLE BEAM
Beam with 4 weldable hooks separated at 3000 mm to hold a sling and handle longitudinal loads. The load balancing must be done by estimation.
DELIVERY OF BEAM OF 400T
Manufacturing of adjustable beam of 400 kg of capacity. It has a permanent central hook and 2 mobile and adjustable hooks, every 250 mm, that provides a length from 1500 to 3000 mm. It also has 2 weldable hooks in both sides. The hook handling is performed by a 2 leg sling chain and one ring.
DELIVERY OF 2T C HOOK
Small 2t C hook, for lifting and handling of coils and with horizontal axis. It has protection of High Density Polyethilene (HDPE) 1in the basement, to protect the material.